BMSF - Wallace Wurth (C27) Induction

• Have you already spoken to a BMSF staff member about your project or analytical enquiry?

If not, please contact BMSF at bmsf@unsw.edu.au or a BMSF staff member directly. You will need to provide a short description of what you want to achieve with your project.

• Arrange a meeting to discuss your analytical needs with a BMSF staff member.

This will inform us about:

a. Whether your analytical needs can be met with our current mass spectrometry methods and instrumentation

b. Whether new method development is required

c. Any relevant costs, charges and training, if applicable

d. Which BMSF labs you require induction to

• Once a BMSF staff member has confirmed you should do an induction (either verbally or by email), please follow the instructions below.

• Register online to the BMSF ACLS system by following this link:

1. Click on “Register Here”
2. Choose “Bioanalytical Mass Spectrometry Facility”
3. Fill out your details.

If you have already previously registered to ACLS and can see the BMSF node when you log on, you do not need to re-register.

• Download and complete the Project Registration Form (PRF), then have it signed and approved by your supervisor.

NOTE: Make sure you have Adobe Reader or Adobe Acrobat installed.

Your supervisor should then email the approved form to the Laboratory Coordinator.

Ensure that this is submitted before your next scheduled instrument training (if applicable), as it is generally a requirement before training starts. If no PRF is received within four weeks of your induction, your ACLS account will be deleted.

Should you have questions about completing this form, please contact the Laboratory Coordinator.

NOTE: You MUST have been referred by a BMSF staff member prior to registering for induction.

• Download the relevant induction notes: Wallace Wurth (C27).

The Induction Notes are for your reference and yours to keep.

• Complete the Induction Questionnaire - Wallace Wurth (C27). You must obtain a score of 100% (if necessary, re-attempt the questionnaire).

The Questionnaire is to be completed by referring to the Induction Notes. This should be completed at least one day before induction.

• Attend the induction tour (Please allow approximately 45 minutes for the induction tours)

Please register to one of the dates below through Eventbrite and save this on your calendar. Late arrivals (more than 10 minutes late) will require you to re-register for the next available date.

• Wallace Wurth Induction tour dates for 2020 are below.  Click on this link to register for an induction tour.

1. Friday 17th January 2020, 10 am

2. Friday 7th February 2020, 10 am

3. Friday 28th February 2020, 10 am

4. Friday 20th March 2020, 10 am

5. Thursday 9th April 2020, 10 am

6. Friday, 1st May 2020, 10 am

7. Friday 22nd May 2020, 10 am

NOTE: Failure to do any of the above steps will mean induction is incomplete and access will not be activated.

• Make training arrangements with a BMSF staff member.

This would have already been discussed in your initial meeting with BMSF. Once you have been deemed competent by a BMSF staff member, please contact Jennifer Tran and Sydney Liu Lau (Laboratory Coordinator) so you can obtain booking rights for the instrument you trained for.

Note that successful induction and ACLS registration does not constitute automatic access to our instruments.